|Enduro Pro [Spray]
Our water based Enduro products.
This range of water based GF products has designed for the professional user and is primarily designed to be applied by spay gun.
General Finishes Enduro Water Based Sanding Sealer is a clear undercoat that forms an easily sandable foundation for your project. Use under all General Finishes Enduro topcoats, providing improved water & chemical resistance. The high solids content builds a fast film. Dries tack free in 10-20 minutes.
Note: always use Enduro Sanding Sealer under Pre-Cat Urethane.
Ready To Match (RTM)
General Finishes Ready To Match (RTM) Stain System is a waterbase colour matching system designed to make your colour matching ability a breeze! This system consists of 10 standard stain bases and a clear that are intermixed to make 150 rich, deep colours.
Trans Red Oxide
See full custom colours shown on Maple and Oak. Each chip is labeled with the formula.
RTM Clear Base
946ml £13.46 exc VAT, £16.15 inc VAT
3.78L £34.67 exc VAT, £41.60 inc VAT
RTM Stain Concentrates
946ml £20.21 exc VAT, £24.25 inc VAT
3.78L £59.92 exc VAT, £71.90 inc VAT
Custom Mixed Colours (inc. tin)
946ml £29.17 exc VAT, £35.00 inc VAT
3.78L £65.00 exc VAT, £78.00 inc VAT
Empty Tin 946ml £3.71 exc VAT, £4.45 inc VAT
Empty Tin 3.78L £5.67 exc VAT, £6.80 inc VAT
The RTM System saves time and money by doing the work for you. You receive 150 custom colours on Maple and Oak along with a formula book. Use our large 100 x 125mm (4" x 5") colour chips as your own colour selection, supplied in an attractive wooden box for a professional looking stain display. General Finishes colour chips are made with cabinet grade plywood. Maple on one side and Oak on the other. Each chip is labeled with the formula right on the chip for quick, easy reference.
See Ready To Match Youtube video.
Use the RTM System to create your own custom colours. Colours can by mixed by weight or volume which allows you to make consistent colors time after time. The RTM System can be used under any water base or solvent base sealers or top coats. The RTM System can be used with any Fillon mixing machine.
If you don’t want to purchase the mixing machine you can still use the mixing lids.
Mixing Lid 946ml £10.79 exc VAT, £12.95 inc VAT
Mixing Lid 3.78L £14.96 exc VAT, £17.95 inc VAT
Crank Handle £6.21 exc VAT, £7.45 inc VAT
There is not a better way to mix and dispense stains.
- Can be spray or hand applied
- 10 Stain Concentrates
- Unlimited Colour Matching Capabilities
- Hundreds of Standard Colour Chips
- Formula Book, Reference Chips
- Excel Formula Calculator
- Mixing Supplies
- Expandable Mixing Station Available
- Low VOC’s, Non Flammable, Water Clean Up.
Material Safety Data Sheet
Technical Data Sheet
Performance Data Sheet
Sample Wood Box without lid
exc VAT, £240.00 inc VAT
Sample Wood Box with lid £240.00 exc VAT, £288.00 inc VAT
Sample Box Base Colours £35.00 exc VAT, £42.00 inc VAT
Contact us for trade and stockist prices.
PLEASE CALL +44 131 661 5553 TO ORDER RTM
Enduro Water Base Lacquer is an economical, high performing clear finish that provides superior clarity and hardness. Designed for interior use on furniture, cabinets, & millwork, it exhibits excellent water and chemical resistance. Enduro Water Base Lacquer dries rapidly and displays excellent early block resistance. It has illustrated superior performance to solvent based lacquers, providing improved stack times, hardness, lacquer thinner resistance,
and fingernail polish remover resistance.
Enduro Water Base Lacquer is VOC-compliant, low odor, non-flammable, and will clean-up with soap and water. It is self sealing, however General Finishes Enduro Sanding Sealer is recommended to provide the optimum quality finish.
Enduro Crosslinker can be added for additional
chemical & water resistance.
Sheens: Flat (10), Satin (35), Semi-Gloss (50) and Gloss (90).
Recommended HVLP atomizing sets: .043 -.051 tip and nozzle, No. 9 -10 air cap. See our Guide for Spray Tip Sizes.
Air-Assisted or airless: 0.009" - 0.012" tip.
For more details see:
Enduro Water Base Lacquer Technical Data PDF.
Enduro Topcoats Force Cure Guidelines PDF.
VAR Top Coat
Enduro-Var is a self crosslinking polyurethane that looks more like an oil varnish than a water coating. It ambers slightly, is our most durable coating, is highly water resistance, and is both sprayable and brushable. It is our top of the line coating and should be used when you need the very best. Suitable for cabinets and millwork.
Enduro-Var ADHERES WELL only over WATER STAINS, DYE STAINS, and RAW WOOD. It will adhere over an oil stain ONLY IF the stain is completely dry (minimum 4 days drying). Use Enduro-Var over any other surfaces at your own risk.
Available in Flat, Satin, Semi-Gloss and Gloss sheens.
See Enduro Var Urethane Varnish Technical Data PDF.
Enduro Conversion Varnish new from August 2013.
Conversion Varnish is the latest addition to our professional water based product line. It is a two component post catalysed urethane topcoat suitable for bar tops and commercial applications where ultimate durability is necessary. General Finishes Conversion Varnish has a 6-8 hour pot life once catalysed and can be re-coated in 1-2 hours.
General Finishes offers everything you need to make your finishing experience productive and easy, from open time extenders, cross-linking hardners to wetting agents to decrease dry time.